Walmart US Ecommerce Website

GENERAL MERCHANDISE

PHARMACY

GROCERIES

VUDU

SPARK

PHOTO

ADVERTISING

SAVINGS CATCHER

GIFTCARDS

INHOME

AFFILIATE

ONEAPP

LOTUS

HELP

SMART_REORDER

GROCERY

CONV_COMMERCE

New Copy Block Topic Module, Tuesday, April 09, 2024, 3:25:19:46 am

New Pills Module Module, Thursday, August 22, 2024, 2:14:30:02 pm

Sort

Sold By

In-store

Speed

Price

Online Savings

Availability

Customer Rating

New Sort & Filter on Topic Page Module, Monday, January 15, 2024, 3:08:36:58 pm

Best Seller

Best Match

Price: low to high

Price: high to low

Walmart

Marketplace sellers fulfilled by Walmart

Marketplace sellers

Tomorrow

2 days

Anytime

Automotive

Electronics

Home Improvement

$100 - $150

$150 - $200

$200 - $300

$300 - $400

Reduced Price

Online

4 - 5 Stars

3 - 3.9 Stars

2 - 2.9 Stars

1 - 1.9 Stars

The P Audio C15-4800CA is a high output wide bandwidth transducer. The C15-4800CA is an upgraded design that features many of P Audio&#39;s new technologies and performance upgrades. The 15 inch &#40;381mm&#41; diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The C15-4800CA has been optimized for use in two way or three way sound reinforcement systems and has a rated operating range of 55Hz to 2000Hz. The C15-4800CA employs a large 3.9 inch &#40;99.3mm&#41; diameter voice coil that provides an AES rated 1200 watts of continuous power handling and a full 4800 watts of peak rated power handling when sufficient amplifier headroom is available. The C15-4800CA utilizes P Audio&#39;s Auto Balanced Cooling &#40;ABC&#41; technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audio&rsquo;s rectangular wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling. The transducer employs magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The C15-4800CA also features a double spider configuration that further enhances system reliability and mechanical control. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity. . Nominal impedance - 8 OHMS. Sensitivity - 96 dB. Frequency range - 55-2000 Hz. Chassis type - Cast aluminum. Magnet type - Ferrite. Magnet weight - 3.17 kg/111.8 oz. Voice coil diameter - 99.3 mm/3.9 in. Coil material - CCA-R. Former material - Glass fiber. Cone material - .Paper. Surround material - Cloth. Suspension - Double. X-max - 5.25 mm/0.21 in. Gap depth - 15.0 mm/0.59 in. Voice coil winding width - 25.5 mm/1.0 in. Net Weight - 13.2 kg/29.1 lb. Packing Dimension WxDxH.430 x 430 x 235 mm. Shipping Weight - 14.2 kg/31.3 lbSmall Signal Parameters&#58;. Re - 5.50. Fs - 51 Hz. Mms - 126.83 g/4.47 oz. Mmd - 112.45 g/3.97 oz. Qms - 7.40. Qes - 0.43. Qts - 0.41. Vas - 80.57 lt/2.85 ft. Bl - 22.66 Tm. Cms - 9e-05 m/N. Rms - 5.39 Ns/m. Le &#40;at 1kHz&#41; - 0.67 mH. Sd - 855 cm2 in.- SKU: TBALL13519

P Audio C154800CA 15 In. 4800 Watts Woofer

ApplicationsThe SD12-4000CA is a high output wide bandwidth transducer designed for low frequency response in two way designs and for high output mid bass The 12 inch &#40;305mm&#41; diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies. This design is optimized for both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The SD12-4000CA has been optimized for use in two and three way sound reinforcement system designs and may be used in either mid bass or low frequency applications. The operating bandwidth is 60Hz to 3000Hz. The SD12-4000CA utilizes P Audio&#39;s Auto Balanced Cooling &#40;ABC&#41; technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is an inside&#47;outside&#34;&#34; geometry with P Audio&#39;s square wire technology to improve conversion efficiency and provide a very large cross-sectional area for superior cooling. System linearity is achieved by employing magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement for both low frequency and mid band response. The double spider design insures very high displacement and linear response while maintaining excellent control. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.Features. 3.9 in. Very large format voice coil. 4000 watts peak power handling. Active balanced cooling. Ferrite magnetics. Square wire inside&#47;outside coil design. Single spider suspension. Integrated demodulation rings. Die cast aluminum chassisSpecification. Nominal diameter - 305 mm. &#47; 12 in.. Power rating - 1000 Watts&#40;aes&#41;. Nominal impedance - 8 Ohms.. Sensitivity - 97 dB. Frequency range - 60-3000 Hz. Chassis type - Cast aluminum. Magnet type - Ferrite. Magnet weight - 5.20 kg.&#47;183.5 oz.. Voice coil diameter - 99.3 mm.&#47;3.9 in.. Coil material - SV-SQ. Former material - Glass fiber. Cone material - Paper. Surround material - Cloth. Suspension - Single. X-max - 4.65 mm.&#47;0.18 in.. Gap depth - 12.0 mm. &#47; 0.47 in.. Voice coil winding width - 21.3 mm. &#47; 0.84 in.- SKU: ALIAD2304_1

P Audio System SD124000CA 12 in. 4000 Watt Woofer

The 15 in. &#40;381mm&#41; diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer has a rated bandwidth of 45Hz to 3500Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The 15BM-1200CA NEW has been optimized for use in two way or three way sound reinforcement systems.. 3 in. Voice Coil.. 1200 Watts Peak Power Handling.. Ferrite Magnetics.. Precision Circular Wire Geometry.. Die Cast Aluminum Chassis.Specifications. Nominal diameter - 381 mm&#47;15 in.. Power rating - 300 Watt&#40;aes&#41;.. Nominal impedance - 8 ohms.. Sensitivity - 97 dB.. Frequency range - 45-3500 Hz.. Chassis type - Cast aluminum.. Magnet type - Ferrite.. Magnet weight - 2.3 kg&#47;81.4 oz.. Voice coil diameter - 76.2 mm&#47;3.0 in.. Coil material - CCA-W.. Former material - Glass fiber.. Cone material - Paper.. Surround material - Cloth.. Suspension - Single.- SKU: ALIAD0582

P Audio System 15BM1200CA 15 in. 1200-Watt Woofer

Die cast aluminum chassis applications the p audio c15-1600ca is a high performance wide bandwidth transducer. The c15-1600ca is an upgraded design that features many of p audios new technologies and performance upgrades. The 15 inch &#40;381mm&#41; diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The c15-1600ca has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 55hz to 2000hz. the c15-1600ca features a large 3 inch &#40;75.7mm&#41; diameter voice coil that provides an aes rated 400 watts of continuous power handling and a full 1600 watts of peak rated power handling when sufficient amplifier headroom is available. The c15-1600ca utilizes p audios auto balanced cooling &#40;abc&#41; technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. the voice coil design is a bobbin wound geometry with p audios inside/ outside wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling. the transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.. 3 voice coil. 1600 watts peak power handling. active balanced cooling. ferrite magnetics. precision inside/outside coil geometry. Nominal diameter - 381 mm/15 in.. Power rating - 400 &#92;n&#40;aes&#41;.. Nominal impedance - 8 ohms. Sensitivity - 97 db.. Frequency range - 55-2000 hz. Chassis type - Cast aluminum magnet. Type - Ferrite magnet. Weight - 2.74 kg/96.6 oz . Voice coil diameter 75.7 mm/3.0 in.. Coil material - .Al-w.. Former material - Glass fiber.. Cone material - Paper. Surround material - Cloth. Single x-max - 3.25 mm/0.13 in. gap- SKU: TBALL13523

P Audio C151600CA 15-Inch Precision Transducer

The P Audio SD12R100 is a high output wide bandwidth transducer. The SD12R100 is a highly upgraded design that features many of P Audio&#39;s new technologies and performance upgrades. The 12 inch &#40;305mm&#41; dia-meter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer has a rated bandwidth of 55Hz to 2000Hz. The transducer uses high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SD12R100 has been optimized for use in two way or three way sound reinforcement systems. The SD12R100 employs a large format 4 inch &#40;101.6mm&#41; diameter voicecoil that provides an AES rated 1200 watts of continuous power handling and a full 4800 watts of peak rated power handling when sufficient amplifier headroom is available. The SD12R100 utilizes P Audio&#39;s Auto Balanced-Cooling &#40;ABC&#41; technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audio&#39;s precision round wire technology in an inside/outside geometry to insure very high conversion efficiency.The PAudio circular wire technology and inside/outside winding configuration provides a very large cross-sectional area that substantially improves system cooling and reduces power compression. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The SD12R100 also features a single spider configuration that provides system reliability and mechanical control. The cone suspension is a high excursion rubber based design that is ideal for deep bass applications in band pass enclosures and extended bass vented designs. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.. Nominal diameter - 305 mm/12 in.. Power rating - 1200 W&#40;AES&#41;.. Nominal impedance - 8.. Sensitivity - 89 dB.. Frequency range - 55-2000 Hz.. Chassis type - Cast aluminum.. Magnet type - Neodymium.. Magnet weight - 0.45 kg/15.8 oz.. Voice coil diameter - 101.6 mm/4.0 in.. Coil material - SV-W.. Former material - Glass fiber.. Cone material - Paper.. Surround material - Rubber.. Suspension - Single.. X-max - 7.5 mm/0.30 in.. Gap depth - 15.0 mm/0.59 in.. Voice coil winding width - 30.0 mm/1.18 in.. Net Weight - 6.7 kg/14.8 lb.- SKU: TBALL13758

P Audio SD12R100 1200W 4 In. Voice Coil 12 In. Driver

Power handling ferrite magnetics precision circular wire geometry stamped steel chassis applications the p audio e12-800ca is a high output low frequency transducer. The e12-800ca is an upgraded design that features many of p audio&#39;s new technologies and performance upgrades. The 12 inch &#40;305mm&#41; diameter piston will produce extremely high sound pressure levels at low frequencies and is ideal for high level full range response in both live sound and recorded music venues. The operating bandwidth of the e12-800ca is 50hz to 3500hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio.general specifications&#58;. e12-800ca high output 12 inch precision transducer nominal diameter-305 mm/12 in. power rating-200 watts&#40;aes&#41;. nominal impedance-8 ohms. sensitivity-95 db. frequency range-50-3500 hz. chassis type-Heavy duty stamp. steel magnet typ-Ferrite. magnet weight-1.4 kg/49.4 oz. voice coil diameter-63.7 mm/2.5 in. coil material-Cca-w. former material-Glass fiber. cone material-Paper. surround material-Cloth</il>. suspension-Single x-max-4.1 mm/0.161 in. gap depth-8 mm/0.3 in. voice coil winding width-16.2 mm/0.64 in. net weight-4.6 kg/10.8 lbs.. packing dimension wxdxh-330 x 330 x 180 mm. small signal parameters re-5.8 q fs X 59 hz mms X 47.4 g/1.67 oz mmd X 40.37 g/1.42 oz qms X 5.83 qes X 0.63 qts X 0.57 vasX 61.97 it/2.19 ft bl X 12.66 tm cms X 1.6e-04 m/n rms X 2.96 ns/m le &#40;at 1khz&#41; X 0.427 mh sd X 531 cm2 the e12-800ca employs a medium format 2.5 inch &#40;63.7mm&#41; diameter voice coil that provides an aes rated 200 watts of continuous power handling and a full 800 watts of peak rated power handling when sufficient amplifier headroom is available. The e12-800ca utilizes p audios under damper venting technology to improve transducer air flow and reduce turbulence under the damper and around the voice coil. the voice coil design is a bobbin wound geometry with p audios precision round wire technology.- SKU: TBALL13135

P Audio E12800CA High Output 12 Inch Precision Transduce

Features&#58;. Active Amplified 2-Wav full range PA Speaker System. ABS Impact resistant lightweight system with a trapezoidal design. Wide Dispersion Horn. LED Display. Extremely powerful mid-lower 15-in woofer. Tweeter 1.75 in. Power RMS - 250W . Peak Watts - 1000W . Impedance - 4 ohms. Frequency response - 50Hz -20KHz . Sensitivity - 98dB &#40;&#43;1-2dB&#41; . Volume 1 - Controls the volume of microphone 1. 6.35mm Jack for Mic 1. XLR Connector for Mic 1. Volume 2 - Controls the volume of line in. RCA input connector for CD, tuner, or mixer, etc.. XLR line in for CD, tuner or mixer, etc.. 3.5mm input connector. XLR Line out to another active speaker. Tone level control for high frequency at range &plusmn;12dB. Tone level control for low frequency at range &plusmn;12dB. LED clip indicator - lights up when input signal reaches distortion level.. Reduce input level to eliminate distortion. Volume 3 - Controls the volume of MP3 player. Power Switch. IEC main power cable connection. Line out for another optional active speaker. Mic Input Level - &#60;5mV . Line In voltage Level 250mV- SKU: TBALL13618

P.Audio System(7)

Your data, your choice